Our sawn timber is sorted according to quality and left in a shaded area for natural drying, reducing its moisture content from 90–100% to 30-40%. After reaching this moisture level, the kiln drying process begins. This process is computer-assisted, achieving a moisture content of 8-12%, after which the timber can be used in the manufacturing of furniture, stairs, countertops, etc.
"Standard" quality is recommended for those areas where economic efficiency has priority. It is ideal for making stairs, doors, long elements, etc. Cracks on the end twice the width of the piece and smoothed knots are accepted. Density: 700 kg / m3
It is a hemmed timber with a uniform yellowish-brown colour.
The lumber is predominantly clean, but 1-2 sound knots and end cracks as wide as the width of the piece are acceptable.
It is a hemmed timber with a uniform yellowish-brown colour.
The lumber is predominantly clean, but 1-2 sound knots and end cracks as wide as the width of the piece are acceptable.
"Standard" quality is recommended for those areas where economic efficiency has priority. It is ideal for making stairs, doors, long elements, etc. Cracks on the end twice the width of the piece and smoothed knots are accepted. Density: 700 kg / m3
"Standard" quality is recommended for those areas where economic efficiency has priority. It is ideal for making stairs, doors, long elements, etc. Cracks on the end twice the width of the piece and smoothed knots are accepted. Density: 700 kg / m3
Standard quality beech timber is a predominantly clean timber.
We accept 1-2 sound knots, end cracks as wide as the width of the piece and 10-15% red heart .
Insect holes and rot are not acceptable.
Density 720 kg / m3.
Standard quality beech timber is a predominantly clean timber.
We accept 1-2 sound knots, end cracks as wide as the width of the piece and 10-15% red heart .
Insect holes and rot are not acceptable.
Density 720 kg / m3.
Standard quality Beech Sawn Timber is predominantly clean timber. 1-2 healthy knots, end cracks as wide as the width of the piece and red heart in proportion 10-15 are accepted. Insect holes and rot are not accepted. Density 720 kg / m3.
"Standard" quality is recommended for those areas where economic efficiency has priority. It is ideal for making stairs, doors, long elements, etc. Cracks on the end twice the width of the piece and smoothed knots are accepted. Density: 700 kg / m3